For customers looking for a mix between quality and a longer lifespan, Payne offers affordable air conditioning systems. However, there is one common question people ask, and that is how to reset the Payne air conditioner. Since we want to help you, we have already conducted thorough research.
To reset your Payne air conditioner, you must:
- Switch off the air conditioner
- Locate where the circuit breaker is
- Wait a minute before turning the air conditioner back on
As you can see, resetting a Payne air conditioner is an easy thing to do. You need to know how to do it correctly. If you want to understand your Payne air conditioner better, it would be best to keep reading. Doing so might also answer some of your additional questions.
Resetting A Payne Air Conditioner
We will provide detailed information about Payne air conditioners to understand how to operate them properly.
What Is The Reason For Resetting Payne Air Conditioners?
Like other electrical appliances you own in your home, an air conditioner also has its circuit breaker. In the event of an overload, you can immediately use the breaker to shut off your device. It is indeed a helpful switch.
One situation that can cause an overload is when the electricity is restored after a power outage. The abrupt increase in voltage can damage your device's circuitry.
Sometimes, all it takes is a fast reset of your Payne air conditioner if you are experiencing temperature problems or any issues.
How To Reset A Payne AC
This section will explain how to reset your Payne air conditioner by walking you through the simple process.
1. Switch Off The Air Conditioner
You may switch off your Payne air conditioner using the thermostat. Don't let it run your air conditioning unit until you're finished restarting it.
2. Locate The Circuit Breaker
After switching your air conditioner off from the thermostat, you will need to locate the circuit breaker box.
You can typically find it either in the following;
- cupboard
- cellar
- crawlspace
- sometimes mounted on the exterior of the house
And if you have already located it, you can now disable the air conditioner. Doing this step will ensure you avoid electrical accidents.
3. Wait A Minute Before Turning The Air Conditioner Back On
We highly suggest you wait 60 seconds after switching off the air conditioning unit from the circuit breaker.
Additionally, it is best to alert everyone who lives in the house that you are about to reset the circuit breaker. This will prevent anyone from turning any electrical appliances on while doing work.
When To Switch On The Air Conditioner
Assuming you finish waiting a minute, you now need to wait another minute. This technique will allow the air conditioner to automatically power back up. After that, operate the thermostat and restart the air conditioning unit.
To determine whether or not your air conditioner is functioning correctly, you should run the thermostat to the cool setting. Moreover, you must ensure you set it at least five degrees lower than the room's temperature.
What To Do If Payne Air Conditioner Still Doesn't Work After Resetting?
Don't keep trying to reset the circuit breaker if you've already finished resetting your Payne air conditioner and it still isn't operating correctly. It may cause a more significant issue if you keep doing this.
All you need to do in this situation is call for the help of an HVAC professional to solve the issue for you. A thorough air conditioning unit examination is a must since it may have additional problems aside from a tripping circuit breaker. Plus, it is not something you can do yourself.
What Are The Common Payne Air Conditioner Issues?
Payne is a brand that produces reliable home appliances. However, even the most dependable gadget eventually breaks down and needs fixing. Below are some of the common issues:
Why Does The Payne AC's Condensing Unit Not Work?
This issue is common because of a faulty thermostat. You can manage the cooling and heating system by using the contacts in the thermostat. The air conditioner won't work if the connection doesn't work.
Why Does Payne Air Conditioner Not Produce Cool Air?
The process here is that the control board transmits a low-voltage signal to the contactor. And upon getting the signal, the contactor will close the circuit, thereby supplying power to the various parts of the condensing unit.
Simply put, the condensing unit will not receive power if the contactor is not operating well or is faulty. It is best to utilize a multimeter to verify that the contactor is not working. So, in the absence of continuity, we suggest you change the contactor to a new one.
Check out this multimeter on Amazon.
Why Is The Payne AC's Fan Motor Not Working?
A faulty capacitor will result in a non-working fan motor. Moreover, it can also produce a noisy and overheating air conditioning unit. You should examine the capacitor immediately if you notice any of these issues. And if you notice it is leaking or there is a bulge, replace it with a new one.
Why Is Payne Air Conditioner Loud?
One possible issue here is the fan motor of the condenser. It may be experiencing wear and tear on the bearings, which creates a lot of noise.
Please make sure the condenser fan motor's bearings are OK by turning it by hand. Replace the motor if it makes a grinding or stuttering sound when turned.
What Are The Different Payne Air Conditioning Units?
Payne has a wide variety of air conditioning parts, all of excellent quality. Each Payne air conditioner is flexible enough to serve various purposes, but selecting the right one requires some background knowledge. To help you decide, we'll provide you with some of the best units available.
Budget-Friendly Payne AC Unit
The 13 PA13NA is a simple, long-lasting, and inexpensive single-stage air conditioner. It has a SEER rating of 13, and the operating noise is as low as 74.
Benefits:
- Budget friendly.
- Durable.
Drawback:
- Due to energy efficiency regulations set by the U.S. Department of Energy, installation in some regions of the country may be prohibited.
What Payne AC Model Provides Better Temperature And Humidity?
The PA17NA is a two-staged variable central air conditioning unit. Energy Star certified this model for having better temperature and humidity control. An enclosed wire grille on the robust exterior provides further protection from the elements.
It has a SEER rating of 17. And the operating noise is as low as 73 decibels. It is best for people who seek an air conditioner that can remove humidity consistently.
Benefits:
- It has a two-stage, high-efficiency scroll compressor system.
- Cabinet made of galvanized steel and coated with an anti-corrosion paint provides long-term protection.
- It uses only 25 percent of the energy it would need at full speed, saving a lot of money.
- It has the R-410A refrigerant, which doesn't harm the ozone layer.
Drawback:
- It is more expensive to purchase compared to a single-stage unit.
What Is The Most Energy-Efficient Payne Air Conditioner Unit?
Payne PA16NW central air conditioner is the most energy-efficient model available. It has an Energy Star certification. This air conditioner has one cooling setting (single stage), but it does a great job of keeping a room cold while consuming very little energy.
It has a SEER rating of 17, and the decibel level can drop to as low as 73. It is best for homeowners who seek an affordable cooling solution.
Benefits:
- This air conditioner operates quietly.
- The installed wire grille is strong enough to survive severe weather and keep debris away from blocking the unit.
- Capable of adjusting to new circumstances.
- Made to hold up against corrosion.
Drawbacks:
- It does not dehumidify air like two-staged variable air conditioners.
- Requires more power than a two-staged variable.
Cheapest Payne AC Unit
You can go for the PA15NC Payne air conditioner if you want a durable yet cheap unit. It contains sturdy components, like protective nickel-plated housing.
The system of this unit can generate tons of cooling power between 1.5 and 5. Additionally, a filter dryer shields the system. It has a SEER rating of 14, and the operating noise is 75 decibels.
Benefits:
- It offers a durable exterior.
- It is exceptionally resistant to weather.
Drawback:
- It is not that energy efficient.
What Payne AC Model Endures Extreme Temperature?
The PA14NC is a single-stage compressor central air conditioner that can endure extreme temperatures and debris.
This model has excellent protection from the elements, with a galvanized steel frame and a baked-on powder coating that covers it.
It has a SEER rating of 14, and the operating noise is 75 decibels.
Benefits:
- You can easily clean its coil because of the inlet grille panels.
- Although single stage, it has a high performance.
- It contains a system-protecting filter dryer.
Drawback:
- It operates at full capacity.
What Payne AC Model Provides Excellent Durability?
The Payne's PA16NA is a single-stage variable air conditioner. It is an Energy Star-certified unit that restricts noise to 76 decibels. Moreover, it has a SEER rating of 17.
Payne created this model for excellent durability with a galvanized steel cabinet and waterproof paint. So, it is best for homeowners who want to reduce their initial investment and maintenance costs.
Benefits:
- It is corrosion resistant.
- It has a relatively high SEER rating.
Drawback:
- Since it only has one stage, it performs at full capacity every time.
In Closing
Resetting a Payne air conditioner is a straightforward task. If you notice something wrong with it, it would be best to inspect it and take action immediately. However, if you don't know enough about troubleshooting air conditioners, we highly suggest calling for the help of an HVAC professional.
We hope this post answered all of your questions. If you still have additional concerns, please comment below. If you wish to continue reading, you can check these posts out: