You may want to clean your Procom heater but wonder how to go about the whole process. Fortunately, we have done the legwork for you, and here is what we found.
Follow these steps if you want to clean your Procom heater:
- Turn off the heater
- Clean the outer part
- Clean the inner part
- Examine the gas pipe and blower
- Dry and reassemble all detached parts
To maintain a Procom heater, you have to clean it regularly. This increases the lifespan. Keep reading to get detailed information on how to clean a Procom heater.
How To Clean A Procom Heater
It is essential to know how to clean your Procom heater thoroughly. The following is a step-by-step guide for cleaning a Procom heater:
Step 1: Turn Off The Heater
Before cleaning your Procom heater, it is important to turn it off. Unplug it from the electrical socket and wait for it to cool for about thirty minutes. You may get burned if you try touching it before it cools down.
Additionally, the electrical components of the heater may still have residual charges that can shock you. It is also advisable to wear a face mask to protect yourself from the dust particles and debris expelled from the dirty heater.
This step is crucial; safety matters in all you do.
Step 2: Clean The Outter Part
You should first clean the exterior of your Procom heater before proceeding to clean the interior.
The Procom heater's casing is usually the first part to collect dust and grime before those particles make their way inside. As a result, there will be a significant accumulation of dirt and dust on the exterior.
You need a paper towel or a cloth to remove any dust that has gathered on the surface.
It is also advisable to use soap and water. Avoid using chemical products because they may contain toxic and flammable substances that will linger and burn up later when the heater is turned on.
Step 3: Clean The Inner Part
Once you have finished cleaning the exterior part of the heater, it is time to dismantle it. You may need to consult the owner's manual that came with your heater before taking off the casing. The components are typically held together by screws, so you may need a screwdriver.
After removing the case from your Procom heater, clean everything with a vacuum cleaner. Use a small nozzle so that you can reach small holes.
After that, wipe off the interior with a dampened towel or cloth. However, avoid getting any of the internal components wet, as it may take several days for them to dry.
Step 4: Examine The Gas Pipe and Blower
The Procom heater can be run on either propane or natural gas. Therefore, it is essential to ensure there aren't any cracks in the pipe that could let in dangerous gases like propane or carbon monoxide.
You can use foil tape to repair small holes, but corroded flues must be replaced. Cleaning your heater is an opportunity to examine other parts of the device, including the gas line and blower.
In addition, you should inspect the blower belt for signs of wear and looseness. A slack belt can cause the blower to work less efficiently. After examination, clean both parts if dirty.
Step 5: Dry And Reassemble All Detached Parts
After you have finished cleaning the interior of your Procom heater, leave it to dry for a while. If you put the case back on without allowing it to dry first, there is a possibility that mold will begin to form inside the heater. When all parts are dried, you can reassemble any detached parts.
How Often Should I Clean My Procom Heater?
As a general guideline, you should give your Procom heater a thorough cleaning at least twice a year. This is to ensure that your heating system continues to function effectively and for a more extended period.
However, your heater may need cleaning more often depending on factors such as age, the number of people in your home, whether or not you have any pets, and the level of dust in your environment.
How Long Can You Run A Procom Heater?
The amount of time to keep your Procom heater running depends on personal preferences. However, it should not be on continuously to conserve as much energy as possible.
The Procom convection heater has a heating capacity of up to 1,900 square feet, and it can operate continuously for 11 hours on a single 20-pound propane tank.
You can tune the output anywhere from 40,000 to 80,000 BTUs using a flexible temperature gauge, and the machine does not require electricity.
Can You Get Carbon Monoxide Poisoning From Procom Heater?
Yes, any type of gas heater has the potential to emit unsafe levels of carbon monoxide. This includes traditional and contemporary heaters, such as the Procom heater, central heating units, space heaters, and decorative appliances like decorative log fires.
Carbon monoxide is produced by the combustion of several different fuels, including oil, propane, natural gas; gas appliances; and fireplaces.
It poses a risk to both human health and property. It is advisable to get some fresh air as soon as possible if exposed to this gas and then contact a physician.
It is essential to be aware of the risk of carbon monoxide poisoning because the early warning signs of CO poisoning are extremely similar to those of food poisoning.
In most cases, carbon monoxide exposure is not usually considered, and the patient is sent home with serious or potentially fatal consequences.
A licensed or registered specialist with an endorsement to service Type A gas appliances is required to perform maintenance on all gas heaters at a frequency of no less than once every two years.
An authorized gas fitter performs a check on the installation, which includes inspection for carbon monoxide leakage.
How Long Can A Procom Heater Last?
How long a Procom heater lasts greatly depends on several factors, including how frequently it is used and maintained.
However, a Procom heater that is properly maintained can have a lifespan of at least 15 to 20 years. If annual maintenance is performed and problems are attended to promptly, its lifespan can be extended to 30 years.
A Procom heater that is not taken care of cannot last as long as one that undergoes regular inspection and cleaning.
How Efficient Is Procom Heater?
A Procom heater is known to be very efficient. However, about 9.6 percent of the energy is obtained from burning hydrogen. When this hydrogen comes in contact with air, it becomes water vapor. But for the heat to be gotten back, water condensation needs to occur.
In ventless heaters, including Procom heaters, the vapor may start condensing on some surfaces like walls and ceilings. This may lead to rotting; in some cases, mold may begin to form.
To prevent this, the efficiency can be decreased to about 90.4 percent. The vapor will no longer build up on those surfaces when the reduction is made.
Additionally, a Procom heater can bring harmful pollutants into a given space. The pollutants can sometimes be nontoxic or toxic, thereby threatening human health.
When the pollutants come out of the heater, they should be mixed with air through an exhaust system. How big or small the space is and the health of the people around it determines the effect of the pollutant.
To Wrap Up
Cleaning a Procom heater is an easy task that should be carried out often. To clean your heater, you have to turn it off, clean the outer and inner parts, then examine the gas pipe and blower. After that, you can dry and reassemble the detached components.
Remember, do not fix back the parts without drying them to avoid mold growth. Cleaning a Procom heater is an opportunity to examine its components for damage and get them fixed as soon as possible.
If you enjoyed reading this post, here are similar articles you may like: