Disclosure: We may get commissions for purchases made through links in this post.
Applying spray foam insulation to keep your home dry and comfortable is a great DIY project. But even when you try to avoid it, spray foam can get all over your hands and hair, which can be extremely irritating - not to mention concerning! Don't worry; we've conducted research to help you find the solution to this problem.
To remove wet spray foam insulation from your skin, you will need to soak up a rag or cloth in acetone and use it to wipe off the spray foam. If it has dried, however, you'll have to use a pumice stone, exfoliating soap, and petroleum jelly or lanolin. If the spray foam is stuck in your hair, you will need to use acetone or trim off the affected hair.
Removing spray foam from your hands and hair can be quite tricky, so keep reading to discover the details on how to do this. We also have more answers to your related questions about this topic.
How To Get Spray Foam Insulation Out Of Your Hands
Whether you forgot to wear gloves or misdirected the spray, you can get spray foam all over your hands and skin. But don't panic, because you can get it out with a few tricks. However, keep in mind that removing wet and dried spray foam are two very different things.
To remove wet spray foam from your hands:
1. Remove excess spray foam
Some foam residue can be removed with soap and water. Run your hands under the faucet and scrub with soap. You can remove it with a rag or paper towel, but this can spread it around and make more of a sticky mess. This is why it's best to simply wash it off with water.
2. Soak a cloth in acetone
Acetone is commonly found in nail polish removers, but make sure to check the ingredients because some polish removers don't have it. Once you get your source of acetone, you'll need to dampen a rag or towel with it.
3. Rub affected areas
The acetone will make it easier for you to remove the wet spray foam, so this should be fairly easy. Rub your skin thoroughly and make sure to get into all affected areas.
Acetone can remove natural oils from your skin, leading it to become flaky, cracked, or irritated. This is why it's important to moisturize after using acetone on your skin. You can first, wash your hands, and then use hand lotion for this step.
Now, what happens if the wet spray foam has dried? Well, it's still possible to get it out! Just remember to remove it as soon as possible to prevent harm to your skin and to your health.
To remove dried spray foam from your hands:
1. Scrub your skin with an exfoliating soap
Most exfoliating soaps have a fine, grainy texture that will help remove the dried spray foam. Be sure to scrub thoroughly to encourage the spray foam to fall off your skin.
2. Use a pumice stone
Pumice stones are typically used to exfoliate skin and remove corns, calluses, and dead skin. In the same way, it can remove dried spray foam from your hands. Rub it into the affected areas in a circular motion. Then, wash your hands with soap and warm water.
3. Apply petroleum jelly or lanolin
Apply a thin layer of either petroleum jelly or lanolin to the affected areas. These will help loosen up any remaining residue and also moisturize your skin. Cover it with plastic cling film for about an hour.
4. Rinse it all off and moisturize
Remove the plastic cling film and rinse off the petroleum jelly. Leftover residue should fall off as well at this point. After washing it off, moisturize your skin with hand lotion to prevent irritation.
If following these steps doesn't get the spray foam out of your hands or any other part of your body, consider shaving off your body hair in the affected areas to remove it.
How To Get Spray Foam Insulation Out Of Your Hair
Getting spray foam out of your hair may be more challenging. You will need a little more patience with this undertaking, especially since you'll have to be more thorough in checking strands of your hair for spray foam residue.
Here are the steps to remove wet spray foam from your hair:
- Wipe it off with a cloth or rag.
- Use acetone to remove any residue.
Now if the spray foam has dried, it will be removed when you wash your hair, but it may take several days for it to be completely eliminated. Your remaining option at this point would be to have a haircut to remove it quickly and efficiently.
How do you get dried spray foam out of clothes?
Acetone is typically used on clothes to remove wet spray foam. However, if it has dried, you will have to remove it by hand. To do this, you will need to break the dried foam off with a pumice stone, nail file, or a scouring pad.
Be careful to avoid damaging the fabric. You can also apply mineral spirits to the back of the affected area to loosen up the dried spray foam.
Will mineral spirits remove spray foam?
Mineral spirits can remove spray foam, but only when it is wet or has not cured. It cannot remove dried spray foam.
Does WD 40 remove expanding foam?
Yes, you can remove expanding foam with WD-40 using the straw that comes with it. It will dissolve the expanding foam so you can remove it or wash it off. It also works on dried expanding foam. However, in some cases, you may need to sand or scrape the foam off.
To learn more about this issue, read this informative article: "Does WD-40 Remove Expanding Foam?"
How long does spray foam insulation take to dry?
Spray foam insulation usually becomes tack-free in 20 minutes and fully cures in about 8 to 24 hours. This will depend on the type of product you're using, the weather condition, the level of moisture of your home, and other factors.
Does spray foam insulation break down over time?
No. One of the most beneficial advantages of spray foam insulation is that, when properly installed, it won't degrade, shrink, or lose its shape. It can last as long as the lifetime of your home.
Want to find out more about the longevity of spray foam insulation? Check out this helpful post: "Does Foam Insulation Shrink Over Time?"
Does spray foam insulation cause mold?
No. Spray foam insulation actually protects against mold since it controls humidity and acts as a barrier that keeps moisture out. This can help keep your home safe from health hazards or structural damage that mold can cause.
What is the disadvantage of foam insulation?
While there are plenty of benefits to getting spray foam insulation, there are quite a few drawbacks too. It's important to weigh the pros and cons before deciding whether to have it installed in your home. Here are some of the disadvantages of spray foam insulation:
On average, installing spray foam insulation costs close to $2,500. It's around two to three times as costly as loose-cell fiberglass insulation.
While it can be applied by yourself, it's quite difficult to DIY, which means you'll likely need professional assistance for the task. Plus, not installing it properly can lead to a whole host of issues. This can further drive up the costs of installing it in your home.
Spray foam insulation traps moisture and prevents it from getting into your home. However, trapped moisture can lead the wood to rot, causing water damage that can compromise the integrity of the structure of your home.
Potential health risks during curing
During its curing process, spray foam insulation can emit gas into the air. Because spray foam insulation takes quite a while to cure, this gas can not only be quite unpleasant to smell, but it can also pose health risks. This is especially concerning for those with asthma or other lung problems.
You can remove spray foam insulation from your hands and hair using acetone. However, this only applies if the spray foam is wet. If it has dried, you will need to use a pumice stone and petroleum jelly for your skin.
Make sure to treat your skin with moisturizer after removing the spray foam to prevent irritation and flaking. If all else fails, you can shave body hair or trim parts of your hair with spray foam residue.