How To Reset A Whirlpool Air Conditioner

Your air conditioner is an essential appliance that helps to cool down the home by transferring heat from the inside to the outside. As a homeowner, you may be wondering how your Whirlpool AC can be reset if the need arises.

Fortunately, we have done some research for you, and here is what we found.

Whirlpool AC may need a reset when its circuit breaker kicks in. Here are the step-by-step procedures to follow if you want to reset your Whirlpool AC:

  • Turn Off your AC.
  • Turn It back on.
  • Press the reset button.

Resetting an air conditioner is an easy-to-do task that can be done without the help of a professional. Keep reading to get detailed information about how to reset a Whirlpool AC.

Air conditioner indoor unit mounted on wall, How To Reset A Whirlpool Air Conditioner

Resetting A Whirlpool Air Conditioner

A reset can solve the problem of an air conditioner blowing warm air, even when the thermostat is set to "cool."

Resetting an air conditioner can be easily done but you can contact an HVAC professional if you are finding it difficult. Follow these steps to reset a Whirlpool AC:

Step 1: Turn Off Your AC

The first thing to do if you want to reset an air conditioner is to turn it off. To do this, all you have to do is press the power button.

Step 2: Turn It On

After turning off your system, wait for some time before turning it on again. Then inspect the settings on your thermostat to know if they are already in default settings.

Step 3: Press The Reset Button

After turning on your air conditioner, press the reset if your system has one. The reset button is usually located at the exterior of the system, along the bottom edge close to the ground. It is can be easily spotted.

If you cannot find the button on the outside, you can check inside the system at the back of the service panel.

After this step, you have completed the resetting process of your air conditioner.

Click here to see this Whirlpool AC on Amazon.

How Long Does It Take For Whirlpool AC To Reset?

After you have completed the resetting process, it will take the internal circuitry of your air conditioner time to reset. This usually takes about half an hour. So you have to be patient with the system.

An air conditioner may need a reset when the circuit breaker in the AC system kicks in. This usually happens following a power outage.

Why Is My Whirlpool AC Not Working?

There are different reasons why your Whirlpool air conditioner is not functioning properly. You should tackle this problem as soon as possible to avoid spending a lot on repair. The following could be the reason why your AC is not working:

Dirty Filter

If the air filter in your whirlpool air conditioner is covered with debris, the cooling capacity of your air conditioner will be reduced. Make sure to clean your air filter often to remove debris. You can also replace them if necessary.

A person wearing blue gloves is holding a heavily clogged dirty air filter in hands before replacing it with the new one

Click here to see this AC air filter on Amazon.

Dirty Condenser Coils

As refrigerants pass through the coil, it dissipates the heat. So, if the condenser coil is dirty, the dissipation of heat will be hindered.

The more the debris on the coils, the less efficient the air conditioner will be. This may cause the AC to work harder before cooling. You should check and clean the condenser coils if it is dirty.

Faulty Compressor

If your air conditioner stops working, it may be a result of a bad compressor. Before you make plans to change it, be sure to check the compressor capacitor. If it is bad, you should call a technician to replace it.

Bad Thermostat

Man's hands strips insulation of the wire for connecting the device later

The temperature of the air is monitored by the thermostat. When the temperature rises, the thermostat switches to give power to the compressor and fan. If the thermostat is faulty, it may not function properly.

To know if the thermostat is bad, set the AC to "cool" and test with a multimeter. If the thermostat is the source of the problem you should consider replacing it.

Faulty Control Board

The control board helps to regulate the compressor's voltage and the fan motor. If the control board is not working, some parts of the air conditioner will not function properly or may not work at all. 

How Do I Unlock My Whirlpool AC?

Whirlpool air conditioners can be locked and unlocked with remote control. When it is locked, it shows an icon, and all the functions on the remote cannot be activated if you press the buttons.

To unlock your AC, press the plus (+) and minus (-) buttons simultaneously. Initially, the remove control may lock. When this happens, push the buttons again.

Split air conditioner on a white wall

Why Is My Whirlpool AC Not Responding To Remote Control?

Air conditioners can be controlled with a remote. This is to make it easier to operate but sometimes the whirlpool air conditioner does not respond to the remote controller.

Here are things to do when you experience this problem:

Check Your Remote Control

If your AC is not responding to the remote control, check if the screen of your remote is working and see if you can read what is on it. If not, change the battery. 

Check Your Distance To The Unit

Another major concern is your distance to the air conditioner. The remote needs to be 10 meters away from the air conditioner for it to operate and there should be no object blocking the sensor.

Also, check the sensor of the remote and that of the air conditioner to see if it is dirty because dirt can prevent the remote from getting a signal.

Check For Weak Battery

If the remote is placed at the right distance and the AC is also functional but the remote isn't working, it means the battery is too weak to function.

Reset The System

If the remote control has been turned off, reset the unit by switching it off for 30 minutes. If the problem still continues, you can now put a call through to a professional technician to run a diagnostic check on your system. 

Check Your LED Light

The LED light is in charge of sending signals to the sensor at the air conditioner's interface. If the remote control is dropped, it could disconnect the LED from other internal components.

To know if the remote is transferring signal from the LED, an infrared sensor card will be required. If it does not respond, the LED is damaged and will need replacement.

A defective LED on the edge of the remote control could be a result of a malfunctioning controller.

Should I Turn Off My Whirlpool AC If It's Not Cooling?

Turning off your whirlpool air conditioner when it's not cooling may not solve the problem. When you first notice that your unit is blowing warm air, there are some things you can do before putting a call through to a professional technician.

Here are things to do when your Whirlpool AC is not cooling:

Check Your Thermostat

Woman felling hot during summer setting her thermostat

Sometimes your air conditioner may be working but blowing hot, this can happen if the thermostat setting is changed from Automatic to Fan.

If the switch is at Automatic, the thermostat can turn on the AC when the temperature in your home increases above the previous temperature.

If you mistakenly set the switch to Fan, the system may release air through the dust but will not cool your home.

Change Dirty Filter

Very dirty air conditioner filter with a lot of dust

If you have not changed the air filters in your unit, they may get dirty or clogged, restricting airflow. When the filter is covered with fur and dust, the unit fails to draw in enough air.

It is recommended to remove and check the air filter to see that is all over it. You should clean or replace it if dirty.

If the filter is see-through, then the problem with your system may not be from the filter.

Final Takeaway

When you notice that your Whirlpool air conditioner is not cooling, you can reset it to solve the problem. Since it is a simple task, you can do it yourself to save costs.

To reset your AC, all you have to do is turn off your system, turn it back on and press the reset button.

If you enjoyed reading this post, here are similar articles you may like:

How To Reset A Sharp Air Conditioner [Inc. Remote]

How To Reset Thermostat After Replacing Batteries

AC Thermostat Keeps Resetting To 85What To Do?

Share this article

Leave a Reply

Your email address will not be published. Required fields are marked *