Appropriate roof ventilation is undoubtedly a factor to consider when purchasing a house, as it determines its efficiency and life expectancy. If you have a double-wide home and want to install ventilation but are wondering how to do so, this post is for you. We searched and asked professionals, and we found these answers.
A double-wide roof ventilation system must have two parts: intake vents and exhaust vents. A ridge vent is the most suitable for handling a double-wide roof pitch, among other roof vents. This type of vent is best for extending the life of your roof.
The ridge vent (exhaust) works by installing soffit vents (intake) on each side of the roof. The combination of both ridge vents and soffit vents creates a proper double-wide roof ventilation system, though some factors require consideration to achieve the best ventilation for a double-wide roof.
As you have read, venting a roof is not easy, as installing a mechanical device to permit the circulation or air inside the house requires expertise. Continue reading to learn how to install a double-wide roof vent successfully.
Double-Wide Roof Ventilation Tips
A proper ventilation system is necessary for a double-wide home like any other traditional home. Having proper ventilation will surely boost the performance of these homes. Here are some of the ventilation tips for a double-wide roof:
- Provide a minimum of 1:300 of the total roof cavity area for free ventilation.
- Half of the required ventilated area is allotted for the upper ventilators.
- The remaining half is apportioned for installing the soffit or eave vents.
- Vent openings and ventilators should be placed to provide a passageway of air in the whole roof cavity area.
- There should be a clearance of one inch between the roof cover and the insulation material to provide a direct airflow.
- Alternatively, install a mechanical ventilation system that can provide ample air in the roof cavity area, provided that intake and exhaust vents must also be present.
- The vents should withstand underlying weather conditions and can restrain the entry of birds and insects.
What Are the Two Components of a Roof Ventilation System?
A typical ventilation system is composed of both intake and exhaust vents. These two are very important in regulating humidity in your entire house. Here are the types of commonly used vents:
Intake Vents
Intake vents are placed at the lowest possible eaves of the roof and must be near soffits. This vent permits outdoor air to enter the roof cavity, thus regulating the humidity level inside the house. The roof intake vents are eave vents, soffit vents, and fascia vents.
Check out this round soffit vent cover with built-in fly screen mesh on Amazon.
Exhaust Vents
Exhaust vents are employed to extract warm air from inside the house and force it outside. This roof vent is mainly set at the highest possible portion of a roof. The most efficient exhaust vent is the ridge vent.
Check out this thermostat solar roof attic exhaust fan on Amazon.
What Is A Double-Wide Manufactured Home?
A double-wide manufactured home combines two small sections to construct a large house. A manufactured home is a mobile home purchased and assembled to create a single home.
Originally a double-wide roof was flat, and roof covers were installed within the desired height. Usually, double-wide roof pitches range from 3:12 to 5:12 or higher.
A double-wide manufactured home has an area of around 946 to 2,187 square feet. Therefore, most new home-buyers choose double-wide homes over single-wide.
A modern double-wide home is not just an ordinary home. The house is skillfully planned and designed to achieve a trendy yet cozy house design. Below are the qualities that make a double-wide home worth the money:
Modifiable
A double-wide home floor plan can be changed depending on your preferred layout. As a homeowner, you have the choice to modify the house and make some improvements to create a stylish contemporary home. Double-wide homes are sold at affordable prices.
Expansive
What's exciting about a double-wide house is that it offers a relatively large living space. You don't need to worry about purchasing appliances and furniture because it can accommodate many items. Therefore, you can live the comfortable lifestyle you want.
State-of-the-Art
Double-wide homes are built following the newest technology and integrate new interior design elements. These houses are one-of-a-kind because they can mimic the way modern houses look.
Why Are Roof Vents Needed On Manufactured Homes?
Roof ventilation has a great impact on the quality of life inside a house. Without proper roof ventilation, warm air is trapped inside the house and can cause unexpected repairs due to humidity.
Ventilation is essential because it helps keep your roof in excellent condition for an extended period, can save energy, and neutralizes room temperature. The following are the upsides of having a roof ventilation system:
Roof durability
Roof ventilation protects the roof shingles from cracking and blistering. Also, roof ventilation secures your ceiling from mold and deterioration.
Weatherproof
Bad weather is inevitable, but its aftermath is manageable. Hurricanes, rain, and snow can cause damage to your roofing over time. However, ventilation averts the aftereffects from happening.
In hot climates, inadequate ventilation can cause asphalt shingle roofs to wear prematurely and void most manufacturers' material warranties.
Controlled Humidity
Improve Air Quality
Ventilation helps dilute contaminated air before it enters your house. Formaldehyde-contaminated air is harmful to human health.
This type of chemical is present in unventilated dwellings. The role of ventilation is to secure your house from any possible contaminants and enhance air quality inside your home.
Ease of Repair and Maintenance
The roof vent is a doorway between the roof and ceiling and is advantageous to future repairs and maintenance. The need to secure and inspect roof vents like gable, ridge, and soffit vents performance from time to time.
What Are The Types of Double-Wide Roofing Material?
When selecting roofing assemblies, there are various types of materials to choose from. However, you must also understand the material's properties and the underlying weather conditions. This section presents the leading roof coverings suitable for double-wide roofs.
GI Sheets
GI corrugated sheet is a covering material commonly used to construct temporary shelters. It is made of galvanized metal and is available in different sizes. The strength of a GI sheet is measured using the thickness of the material. Therefore, the smaller the gauge number, the thicker the GI sheet.
Check out these rustic steel corrugated metal ceiling tiles on Amazon.
Clay Tiles
Clay roof tiles are commonly used as roofing material for residential houses. This type of material is very durable, and it can last over a century. Clay tiles are also fire, water, and heat resistant. Amazingly, these materials are recyclable and environment friendly.
Concrete Tile
Concrete tiles are made from sand, cement, water, and a binding agent mixed and molded to create tile-like shapes. This roofing material is a cost-effective substitute for clay tiles.
Concrete roofing tiles can withstand strong winds and storms. Most concrete tiles can last from 50 to 60 years with proper maintenance.
Check out this heavy-duty electric concrete breaker with case and gloves on Amazon.
PVC Roofing Sheets
Polyvinyl chloride (PVC) roofing sheets are a budget-friendly solution for buildings with lightweight roof assemblies. This roofing material is heavy duty and can last for almost 30 years. PVC roofing sheets are water resistant, rigid, and inexpensive to install.
Wood Shingles
Wood shingles are made from fine pieces of wood cut into tile-like features. The wood is carefully preserved to produce quality roofing material. Treated wood shingles are weather, fire, and insect resistant. This roofing material can also withstand ultraviolet rays.
Asphalt Roofing
Asphalt shingles are manufactured in various shapes, colors, and structures. They are the most affordable roofing material available on the market. This type of roofing can last around 30 years. Asphalt shingles are easy to demolish in case of repair or restoration.
Check out these roofing shingles on Amazon.
Final Takeaways
A double-wide manufactured home is ideal because it is efficient and cost-effective. As with any other traditional house, a double-wide roof requires ventilation to preserve the quality of the house.
The best way to vent a double-wide roof is to install ridge vents and soffit vents. This ventilation provides enough air intake and exhaust flow to circulate through the house. Proper ventilation protects your house from future damage. Most importantly, it can help you can save money and energy.
If you want to expand your understanding of roof ventilation, you can read these posts: