Like other home appliances, a York air conditioner can act up every once in a while. You may need to reset the system when this happens, but how do you do that? Let's take a look below.
To reset your York air conditioner, follow these steps:
- Power off the thermostat.
- Power off your A/C unit.
- Locate the reset button.
- Press the reset button for 5 seconds.
- Turn the A/C unit back on.
As you can see, resetting your York air conditioner is a relatively simple process. This article will discuss why you would need to reset your York air conditioner and how to do so. In addition, we will answer other frequently asked questions about York air conditioners, so read on!
How do I reset my York air conditioner?
There are a few reasons why you might need to reset your York air conditioner. One reason might be if the unit is not cooling properly. In this case, you would need to reset the system to reset the thermostat.
Another reason you might need to reset your air conditioner is if it has been turned off for an extended period of time. For example, if you go on vacation and turn off your air conditioner, you will need to reset it when you return.
Whatever the reason, resetting your York air conditioner is a relatively simple process. You can do it by following these steps:
1. Power off the thermostat
You will want to power off your system by turning off the thermostat. By doing this, you will keep the A/C unit from signaling on until the reset is completed.
2. Power off your A/C unit
The next step is to power off your A/C unit. To do this, locate the breaker switch that powers the air conditioning unit. Also, turn the air conditioner power button on the system itself off.
3. Locate the reset button
Most air conditioners have a reset button located on the system itself. It is usually a small, circular button that is either red or black. Check your owner's manual if you are not sure where it is.
4. Press the reset button for 5 seconds
Once you have located the reset button, press it for 5 seconds. Doing this will reset the thermostat and allow the system to start over. Most units will flash a light or make a sound to let you know it has been reset.
5. Turn the A/C unit back on
Once you have reset the system, turn the A/C unit back on. You can do this by locating the breaker switch that powers the air conditioning unit and flipping it back on. Also, turn the air conditioner power button on the system itself back on. Then go to your thermostat and power it back onto the cooling setting.
Once the unit powers back on, it will start the cooling process from scratch. It may take a little bit of time, so be patient. If your York air conditioner doesn't have a reset button, follow the steps below to reset the unit manually.
What if my air conditioner doesn't have a reset button?
If, for some reason, your York air conditioner doesn't have a reset button, then you will need to reset the unit manually. To do this, follow these steps:
Turn off the thermostat
The first thing is to turn the thermostat completely off. As mentioned earlier, you don't want the A/C unit to start up again until the reset is complete.
Switch off the breaker
Now locate the breaker that powers the air conditioning unit and switch it off. Wait a full minute before turning the breaker back on.
Turn the breaker back on
Once you have waited a minute or two, turn the breaker back on. Wait to turn on the thermostat after completing this step.
Turn the thermostat back on
Wait a full 30 minutes before turning the thermostat back on. By doing this, you are giving the system time to reset completely. Once the 30 minutes is up, you can power on the thermostat and turn it to the "cool" setting.
Check to see if the system is cooling
Now, give the system some time to cool down your home; once it has, check to see if it is cooling correctly by feeling the air coming out of the vents.
If it is not, check the air filter to make sure it is not clogged. If the filter is clean, you may need to call a technician to come and take a look at your York air conditioner.
Why is my York air conditioner not working?
If your York air conditioner still isn't working after you reset it, it is time to check other parts before calling a technician. Let's look at common problems that can occur and how to fix them.
The air filter is clogged
If the air filter is clogged, then the A/C unit will not be able to cool your home properly. Take your filter out, remove any debris, and put it back in. In addition, if you aren't sure when your air filter was last replaced, then it is probably time for a new one.
Depending on the type of air filter, you should replace them every 3-6 months. In addition, you should clean them every month or twice a month, depending on how often you use your air conditioner.
The thermostat is not set to cool
It may seem simple, but this is a common issue. Make sure the thermostat is set to cool and not off, heat, or fan. In addition, make sure your thermostat temperature setting is set to low enough for the system to kick on.
The A/C unit is not getting power
If you have checked the breaker and it is on, the next step is to check the outlet. If the outlet is not working, you will need to call an electrician.
In addition, open the control board and check for blown fuses. If there are any broken fuses, replace them with the same type of fuse.
Check for refrigerant leaks by spraying a soapy water solution around the unit. If there are any bubbles, you have a refrigerant leak and need to call a technician.
It's possible the compressor is bad and will need to be replaced. You can check the compressor by using a voltage tester. If the compressor is not getting power, you will need to call an electrician.
The capacitor is responsible for the smooth running of the AC unit. It helps to start up the compressor and keep it going. If the capacitor is bad, you may need to replace it.
Like the compressor, you can use a multi-meter to test the capacitor. If it is not getting power, then you will need to call an electrician.
Check the evaporator coils
If the evaporator coils are dirty or frozen, it will cause the A/C unit to work harder and eventually break down.
To clean them, turn off the breaker and unplug the unit. Then, use a coil cleaner to clean the coils. Be sure to read the instructions on the coil cleaner before using it.
If the evaporator coils are frozen, power the system and give them 24 hours to complete thaw before turning it back on.
The condenser is dirty
If the condenser is dirty, then it will not be able to release the heat from the system. To clean it, turn off the breaker and unplug the unit. First, remove any leaves or debris in the unit, and then use a garden hose to spray water on the coils.
Then apply a condenser cleaner to the coils and let it sit for 10 minutes. Finally, rinse the coils with water and let them dry before plugging the unit back in.
These are just a few of the many problems that can occur with your York air conditioner. If you have tried these tips and your A/C unit is still not working, then it is time to call a technician.
How long do York air conditioners last?
The lifespan of your York air conditioner depends on a number of factors, including the brand, how often it is used, and how well it is maintained.
On average, York air conditioners last 10 years. However, if you properly maintain your unit, it may last up to 15 years.
If your system is over 10 years old and constantly chasing repairs, it may be time to replace your air conditioner. Replacing an old system with a new one can save you up to 20-40% on your energy bill.
Try resetting the unit before diving into repairs; if you are lucky, this may be all it needs. However, if it is a bigger problem, follow the tips in this article to try and fix it yourself.
However, if you still have problems, it is time to call a technician. York air conditioners are not meant to last forever, and at some point, they will need to be replaced. But with proper maintenance, you can get a few extra years out of them.
Made it to the end? Here are other articles you may enjoy reading:
How To Clean A Heil Air Conditioner