How To Reset A Heat Storm Heater

Are you having trouble with your Heat Storm heater? Resetting it might be the solution!

Resetting your Heat Storm heater is a simple process that can be done in just a few steps.

White portable modern heater

In this post, we'll guide you through resetting your Heat Storm heater so that you can enjoy a warm and comfortable home once again.

What Are Signs My Storm Heater Needs Resetting?

If you're experiencing issues with your Heat Storm Heater, it may be time to reset it. Here are some signs that your heater may need resetting:

Frequent Power Outages

If there have been recent power outages due to storms or other reasons, some electrical appliances might need a reset to function properly again.

Erratic Temperatures

The thermostat might need a reset if the water temperature is inconsistent or varies drastically.

Flashing Error Codes

Some modern heaters come with a digital display that shows error codes. These can indicate a specific problem, and a reset might be recommended.

Reduced Efficiency

If you notice that your heater takes longer than usual to heat up or if it cannot maintain the desired temperature, a reset can sometimes rectify the issue.

Also read: How To Use A Heat Storm Heater

Steps To Reset The Heat Storm Heater

Follow these simple steps to reset your Heat Storm heater:

Step 1: Power Off The Heater

The first step in resetting your Heat Storm heater is to power it off.

You can do this by simply pressing the heater's power button or unplugging it from the wall.

Ensure the heater is turned off before proceeding to the next step.

Step 2: Unplug And Plug-In The Heater

Once the heater is turned off, unplug it from the wall. This will ensure that the heater is completely disconnected from any power source.

Leave the heater unplugged for at least 3 seconds to ensure any residual power is fully discharged. Then plug it in.

Step 3: Hold The Timer Icon

Within 3 minutes of plugging the heater, hold down the timer icon on the heater's control panel for at least 10 seconds.

Doing so will reset the heater's internal timer and resolve any issues you were experiencing.

Once you've held down the timer icon for 10 seconds, release it and wait for the heater to restart.

Safety Considerations When Resetting Your Heat Storm Heater

Before attempting a reset, consider the following safety guidelines:

  • Avoid water: Keep hands dry and ensure the heater's vicinity is moisture-free to prevent electric shocks.
  • Inspect for damages: Check the heater for visible damage like frayed cords or exposed wires. Do not attempt to reset or use the heater if you find any.
  • Ensure ventilation: If the heater emits unusual odors or potential gas leakage, ventilate the room by opening windows and doors.
  • Stable grounding: Set the heater flat, ensuring it won't tip, mainly if tilt-over errors have occurred.

You might also like: How To Unlock A Heat Storm Heater [Quickly & Easily]

Maintaining The Heat Storm Heater

Maintaining your Heat Storm Heater is crucial to ensure its longevity and optimal performance. Here are some tips to help you keep your heater in top condition:

  • Clean the exterior of the heater regularly with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as they can damage the finish.
  • Regularly inspect the air filter and clean or replace it when necessary. An unclean or obstructed filter can diminish the heater's performance.
  • Inspect the power cord for damage like fraying or cracking. If damaged, stop using the heater and contact the manufacturer for assistance.
  • Keep the heater away from combustible materials, such as furniture, curtains, and bedding. Ensure at least three feet of clearance to prevent fire hazards.
  • Store the heater in a dry, cool place when not in use. Avoid exposing it to moisture or extreme temperatures.

Troubleshooting Other Common Issues With Heat Strom Heaters

Here are other common issues with Heat Storm heaters and how to address them.

EE Error

This error pertains to the temperature sensor (often called the probe). When you see this error, the heating element and the fan are deactivated.

To resolve this, unplug the heater and inspect the temperature sensor. The sensor could be either loose, disconnected, or damaged.

EO Error

If you come across this error, it indicates a program setup issue.

Start by unplugging the heater and then plugging it back in.

If the error persists after several attempts, the PCBA (Printed Circuit Board Assembly) may need replacement.

E1 Error

This is a tilt-over error. It signifies that the heater may have been knocked over or is not standing upright.

When this occurs, both the heater and fan are turned off. To resume regular operation, ensure the heater is upright and activate it using the on/off icon.

UH Error

This error is an alert for an incorrect high-voltage power supply. It's crucial to unplug the heater immediately upon seeing this error.

LO Notification

If the display reads "LO," it means the surrounding temperature is below 16°F (-9° C).

HI Notification

Like the "LO" notification, "HI" indicates the ambient temperature.

In this case, it suggests that the environment's temperature exceeds 99°F (37° C).

Related article: My Heat Storm Heater Is Not Working – What Could Be Wrong?

Why Is My Heat Storm Heater Not Blowing?

If your Heat Storm heater isn't blowing air as expected, several reasons might be at play:

Blocked Air Inlet Or Dirty Filter

It's essential to ensure the air inlet isn't obstructed. Additionally, a dirty air filter can inhibit airflow.

Inspect both the inlet and the filter, cleaning or replacing the filter if necessary.

Ambient Temperature

If the room temperature is already higher than the thermostat setting on the heater, the unit may not operate.

This is because the heater recognizes that the room is already at or above the desired temperature, eliminating the need to produce more heat.

Resetting The Heater

If the above solutions don't address the problem, disconnect the heater from the wall outlet for approximately 2 hours.

Once the time has elapsed, plug the unit back in. This can help reset any internal errors or issues that may be affecting its performance.

Final Thoughts

Resetting your Heat Storm heater is a simple process that can be done in just a few steps.

Following the instructions in this article, you should be able to reset your heater and get it back up and running in no time.

Remember to always refer to your user manual for specific instructions and troubleshooting tips.

Share this article

Leave a Reply

Your email address will not be published. Required fields are marked *

Many thanks to OpenAI's ChatGPT for helping fine-tune the creation of this article.